Toma limpiafondos para piscinas de hormigón (tubo 63 mm)
Conexión: 63 mm · Tipo de piscina: Hormigón
Product Code: VP-3
Category: Accesorios de piscina
Toma de barrido para piscinas de hormigón, moldeada en plástico resistente a los UV y a los productos químicos, encolada en el interior de un tubo de 63 mm; se usa con una manguera de limpiafondos de 1.5 pulgadas. Una toma de barrido es una conexión de aspiración de pared dedicada a la manguera del limpiafondos manual, de modo que la piscina puede aspirarse con toda la aspiración de la bomba en lugar de a través del skimmer, y la cesta del skimmer queda libre de la suciedad más pesada. Embébala en la pared unos 300 mm por debajo de la línea de agua, a media distancia del lado largo para que la manguera llegue a todos los rincones, y conéctela al colector de aspiración de la bomba con su propia válvula de aislamiento.
Specifications
| Fixing | Solvent-cemented into the pipe |
|---|
| Material | ABS treated against pool chemicals and UV |
|---|
| Pool type | Concrete |
|---|
| Supplied with | Gaskets and stainless screws |
|---|
| Pipe connection | 63 mm |
|---|
Volume: 0.0018 m³
Availability: Made to order
Frequently asked questions
Concrete or liner fittings?
Concrete versions are solvent-cemented into the pipe and cast into the shell — wall inlets on 50 mm pipe, floor inlets and vacuum points on 63 mm. Liner versions (the -L models) add a flange and lock nut that clamp the membrane from both sides. Order the right variant before the shell is poured: a fitting cannot be swapped after casting.
How many wall inlets does a pool need?
Enough to return the full filtered flow at a gentle velocity and to sweep the whole pool — as a rule one inlet per return branch, placed to push water across the pool towards the skimmers, with floor inlets added on deep or long pools so circulation reaches the bottom. Our engineers set the count from your pool drawing.
What is a vacuum point?
A dedicated suction connection in the pool wall for the manual vacuum hose, so the pool can be vacuumed without going through the skimmer basket. It connects to the suction pipework with its own valve in the plant room; close it when not in use.
What material are the fittings?
ABS treated against pool chemicals and UV, supplied with gaskets and stainless steel screws. The material does not corrode, chalk or crack in chlorinated water and sun, which is why it can be buried in the shell for the life of the pool.
