Waterstar – Swimming Pool Equipment Manufacturer
Egyptian manufacturer of swimming pool pumps, sand filters, LED lights and fittings since 1993. ISO 9001 certified, exported to 14 countries. Shop online or request a quote.
Waterstar manufactures the complete range of professional swimming pool equipment in Egypt — pumps, filters, underwater lighting, skimmers, overflow gratings, ladders and cleaning equipment — from its factory in Badr City, Cairo, operating since 1993, with ISO 9001, ISO 14001 and ISO 45001 certification and exports to 14 countries.
Browse our Swimming Pool Pumps and Swimming Pool Filters, or see the full catalogue.
Product Categories
Featured Products
- SuperStar Pump – SS-100M
Made in four ratings: 0.75 kW (1 HP), 1.1 kW (1.5 HP) and 1.5 kW (2 HP) single-phase, and 2.2 kW (3 HP) three-phase. SuperStar swimming-pool pump, 0.75 kW (1 HP), 220 V single phase 50 Hz. Read flow and head at your working point from the performance curve on this page. - SuperStar Pump – SS-150M
Made in four ratings: 0.75 kW (1 HP), 1.1 kW (1.5 HP) and 1.5 kW (2 HP) single-phase, and 2.2 kW (3 HP) three-phase. SuperStar swimming-pool pump, 1.1 kW (1.5 HP), 220 V single phase 50 Hz. Read flow and head at your working point from the performance curve on this page. - Flexible Vacuum Head – FV-1-12
Made in two widths: 12 inch and 19 inch. Flexible vacuum head, 12 inch (about 30 cm), polyethylene, with 8 wheels and 4 lead weights under 6 ABS covers, for manual vacuuming of pool floors. The weights keep the head on the floor under suction and the wheels let it glide without scuffing tiles, mosaic or liner; the flexible body follows the floor-to-wall cove. - Oval Vacuum Head – FV-1-L
Oval vacuum cleaner head for liner (vinyl) pools, polyethylene, with a built-in brush and internal weights for easy underwater cleaning. The curved edges reach into the tight corners and radiused coves of liner pools where a square head cannot, and the smooth base and brush lift settled dust without scuffing or creasing the membrane. - Underwater Light with Niche – UWL-1
Made in two versions: for concrete pools and for liner pools. Underwater niche light for concrete pools. The niche is cast into the pool wall during construction and the lamp body seats inside it with cable glands and neoprene seals, so the assembly meets international safety practice for 12 V pool lighting and stays watertight for years in chlorinated water. - Underwater Light with Niche – UWL-1-L
Made in two versions: for concrete pools and for liner pools. Underwater niche light for liner (vinyl) pools. The niche clamps the liner between a flanged body and a gasketed front ring, so the membrane stays watertight around the opening, and the lamp seats inside with cable glands and neoprene seals to international safety practice for 12 V pool lighting. - Standard Skimmer – SKIM-1
Made in four versions: for concrete or liner pools, each with a standard (200 × 140 mm) or wide (350 × 175 mm) mouth. Standard skimmer for concrete pools with a 20 × 14 cm inlet opening — the model professional builders specify most often. - Standard Skimmer – SKIM-1-W
Made in four versions: for concrete or liner pools, each with a standard (200 × 140 mm) or wide (350 × 175 mm) mouth. Wide-mouth skimmer for concrete pools with a 17.5 × 35 cm inlet opening — roughly twice the intake of a standard skimmer, so it clears the surface faster on larger or leaf-prone pools. - Overflow Grating – OFG-2-WHT
Made in three models (Nefertiti, Cleopatra and Hatshepsut), three profiles (H23 × W240, H22 × W245 and H38 × W290 mm) and five colours (white, blue, yellow, navy and off-white) — 20 combinations in all. Overflow grating, Nefertiti model — skims the water surface of deck-level and infinity pools by letting the overflowing water fall through into the gutter, taking floating impurities with it. - Overflow Grating – OFG-2-BLU
Made in three models (Nefertiti, Cleopatra and Hatshepsut), three profiles (H23 × W240, H22 × W245 and H38 × W290 mm) and five colours (white, blue, yellow, navy and off-white) — 20 combinations in all. Overflow grating, Nefertiti model — skims the water surface of deck-level and infinity pools by letting the overflowing water fall through into the gutter, taking floating impurities with it. - Multi-Port Valve – MPV-T-15
Made in four versions: top-mount or side-mount, each with 1.5 inch or 2 inch ports. Control unit for managing the pool water system. The top-mount valve seats in the groove on top of the filter with an easy-to-fit two-arm gasket and a port for the pressure gauge. - Multi-Port Valve – MPV-T-2
Made in four versions: top-mount or side-mount, each with 1.5 inch or 2 inch ports. Top-mount control valve for larger filters. It seats in the groove on top of the filter with a gasketed two-arm clamp and a port for the pressure gauge, with three pipe connections (pool line, pump line, drain line), a 63 mm bottom connection for the filter tree pipe and 2 inch threaded heads.
Why Waterstar?
- Quality Guaranteed – All products undergo rigorous testing and quality control
- Certified Excellence – ISO 9001, 14001, 45001 and CE certified
- Complete Range – Pumps, filters, lighting, and cleaning equipment
- Expert Support – Technical guidance from pool equipment specialists
Our Certifications
ISO 9001 | ISO 14001 | ISO 45001 | CE Certified
Frequently Asked Questions
Who manufactures swimming pool equipment in Egypt?
Waterstar is an Egyptian manufacturer of professional swimming pool equipment, operating from its factory in Badr City, Cairo since 1993. It produces pumps, filters, underwater lighting, skimmers, overflow gratings, ladders and cleaning equipment, and is the Middle East and Africa's first manufacturer of a complete full-range lineup.
How much does swimming pool equipment cost in Egypt?
Cost depends on pool volume, the required water turnover rate, filter type and size, pump duty, and the number of lighting units. Waterstar issues a detailed written quotation per project. Send your pool dimensions and intended use to receive one.
Can I get spare parts for imported pool equipment in Egypt?
Yes. Waterstar manufactures and supplies pool equipment spare parts locally in Egypt, including skimmer baskets, covers, gaskets, pump bodies and fittings. Compatibility with imported units depends on the specific size and model — send a photograph or the measurement of the part to confirm before ordering.
How do I choose the right swimming pool pump?
Size the pump from the pool volume and the turnover rate you need — typically one full turnover every four to six hours — then account for pressure loss in the pipework. Divide the pool volume in cubic metres by the turnover time in hours to get the required flow, then select a pump whose performance curve delivers that flow at your system's head.
What is the difference between a sand filter and a cartridge filter?
A sand filter uses a granular media bed and is cleaned by backwashing, which suits larger pools and continuous operation. A cartridge filter gives finer filtration and needs no backwashing, but the cartridge must be cleaned or replaced periodically. Sand filters are the more common choice for commercial and high-load pools.
Do you supply pool contractors and dealers in bulk?
Yes. Waterstar supplies swimming pool contractors, dealers and distributors across Egypt in bulk, with pricing tiers that differ by customer category. Contractors buying for a project should send the bill of quantities to receive a project quotation.
What certifications does Waterstar hold?
Waterstar holds ISO 9001 for quality management, ISO 14001 for environmental management and ISO 45001 for occupational health and safety, together with a CE certificate for European conformity. All four certificates are available to download from the Certificates page.
Does Waterstar export outside Egypt?
Yes. Waterstar exports its swimming pool equipment to 14 countries across the Middle East, Africa and Europe.