Waterstar logo — swimming pool equipment manufacturer in Egypt

Cleaning Equipment

Browse Waterstar's Cleaning Equipment range — pool equipment manufactured in Egypt and trusted across 13 countries in the MENA region.

FV-1-L

Oval vacuum cleaner head for liner (vinyl) pools, polyethylene, with a built-in brush and internal weights for easy underwater cleaning.

FV-1-12

Flexible vacuum head, 12 inch (about 30 cm), polyethylene, with 8 wheels and 4 lead weights under 6 ABS covers, for manual vacuuming of pool floors.

FV-1-19

Flexible vacuum head, 19 inch (about 48 cm), polyethylene, with 12 wheels and 6 lead weights under 10 ABS covers, for manual vacuuming of large pool floors.

HC-1

Hydro Vac cleaning head — a weighted vacuum head with brushes and multiple suction ports that glides over tiled, painted and liner floors, lifting settled dirt into the vacuum hose without scratching the finish.

CM-15

Curved Master wide wall brush — a wide, curved brush head that follows the radius of pool walls and the wall-to-floor cove, so algae film and settled dust are lifted in one pass instead of several. Fits the standard telescopic handle.

CB-1-18

Streamline curved wall brush, 18 inch (about 45 cm), with polypropylene bristles on an ABS back for extra strength, for scrubbing algae film and settled dirt off pool walls, steps and the wall-to-floor cove.

DLF-5

Deep leaf skimmer net (leaf rake) for lifting sunken leaves, twigs and debris off the pool floor. The deep bag holds a large load in one lift, so a pool that has been left after a storm can be cleared without the debris slipping back, and the reinforced front edge scoops without scratching tiles or...

LS-2

Flat leaf skimmer net for removing floating debris from the pool surface — leaves, insects, pollen and blown dust — before it sinks and loads the filter.

TH-2-S

Waterstar all-purpose telescopic aluminium handle for cleaning the pool floor and walls at any depth. The anodised aluminium tube resists chlorinated water and sun, the twist-lock collar fixes the length wherever it is set, and the standard 29 mm end takes the full range of Waterstar leaf skimmers,...

VH-6

Flexible pool vacuum hose, 6 m, for manual vacuuming with a vacuum head and telescopic handle through the skimmer or a dedicated vacuum point. Spiral-reinforced so it does not collapse under suction, with swivel cuffs that stop it twisting while you work.

VH-12

Flexible pool vacuum hose, 12 m, for manual vacuuming with a vacuum head and telescopic handle through the skimmer or a dedicated vacuum point. Spiral-reinforced so it does not collapse under suction, with swivel cuffs that stop it twisting while you work.

VH-15

Flexible pool vacuum hose, 15 m, for manual vacuuming with a vacuum head and telescopic handle through the skimmer or a dedicated vacuum point. Spiral-reinforced so it does not collapse under suction, with swivel cuffs that stop it twisting while you work.

VH-25

Flexible pool vacuum hose, 25 m, for manual vacuuming of large residential, hotel and commercial pools with a vacuum head and telescopic handle through the skimmer or a dedicated vacuum point.