Leaf Skimmer
Type: Deep bag
Available options
Product Code: DLF-5
Category: Cleaning Equipment
Made in two types: deep bag and flat. Deep leaf skimmer net (leaf rake) for lifting sunken leaves, twigs and debris off the pool floor. The deep bag holds a large load in one lift, so a pool that has been left after a storm can be cleared without the debris slipping back, and the reinforced front edge scoops without scratching tiles or liner. Fits the 29 mm Waterstar telescopic handle with a push-clip. Rake the floor before vacuuming — a vacuum head will clog on leaves that the rake removes in seconds.
Specifications
| Material | Polyethylene / ABS, UV and chemical resistant |
|---|
Volume: 0.012 m³
Availability: Made to order
Buy this product online at shop.waterstarpools.com
Frequently asked questions
Which vacuum head should I use?
The flexible vacuum heads (FV-1-12 and FV-1-19, in 12 and 19 inch widths) follow the floor of tiled and painted pools; the oval head FV-1-L suits liner pools; the Hydro Vac HC-1 is a weighted head with brushes and multiple suction ports for fast cleaning of large floors. All fit the 29 mm end of the Waterstar telescopic handle with the same push-clip.
How do I choose the vacuum hose length?
Measure from the vacuum point or skimmer to the far corner of the pool and add a little slack: hoses come in 6, 12, 15 and 25 m. The spiral reinforcement stops the hose collapsing under suction and the swivel cuffs stop it twisting while you work.
Which telescopic handle length?
Choose the extended length that reaches the deepest point of the pool from the deck: TH-2-5 and TH-2-10 cover residential pools of the usual depths. The anodised aluminium tube resists chlorinated water and sun, and the twist-lock collar fixes the length wherever it is set.
How often should a pool be brushed and vacuumed?
Brush walls and floor weekly in season — the curved brushes CM-15 and CB-1-18 follow the wall-floor radius — and vacuum after brushing so the loosened dirt is removed rather than filtered slowly. Skim leaves daily with the DLF-5 or LS-2 leaf skimmer; it is faster than letting them sink and stain.
