Waterstar logo — swimming pool equipment manufacturer in Egypt

Swimming Pool Equipment Manufacturer in Egypt

Browse Waterstar's full catalog of professional pool equipment. Pumps, sand filters, LED lights, skimmers, overflow gratings & accessories.

Waterstar is a swimming pool equipment manufacturer in Egypt, producing pumps, filters, LED lights, skimmers and fittings at our ISO 9001-certified factory in Badr City. Our catalogue covers everything a residential, hotel or competition pool needs: single-phase and three-phase swimming pool pumps from 1 HP to 3 HP (0.75–2.2 kW), filament-wound sand filters with multiport valves, 12V underwater LED lighting, wide-mouth skimmers, main drains, wall inlets, overflow gratings and stainless-steel ladders. Because every item is engineered and moulded in-house, contractors get consistent quality, fast lead times and locally stocked spare parts instead of long import cycles. Waterstar swimming pool equipment is installed in 14 countries across the MENA region and is backed by technical sizing support, full data sheets and manufacturer warranty. Browse the range below or request a project quotation from our engineering team.

Waterstar is Egypt's first full-range swimming pool equipment manufacturer. Our catalogue covers 125 products across pumps, filters, skimmers, lights, fittings, overflow grating, spa equipment and competition equipment, for residential, commercial and competition pools — and every component of every product we make is available as a spare part. All our products are manufactured at our Badr City Industrial Zone facility and certified to ISO 9001, ISO 14001, ISO 45001, and CE standards. Whether you are building a new pool, renovating an existing one, or maintaining a commercial facility, Waterstar has the right equipment for your project.

Our product range includes high-performance circulation pumps available from 1 HP to 3 HP (0.75–2.2 kW) configurations, filament-wound sand filters from 20-inch to 2000mm diameter, energy-efficient LED underwater lighting in 18 W, 24 W and 36 W options, skimmers for concrete and liner pools, decorative overflow gratings in the Cleopatra, Nefertiti, and Hatschepsut collections, vacuum heads, hoses, brushes and leaf skimmers for pool maintenance, ABS wall inlets, floor inlets, main drains, and check valves, plus stainless steel and plastic pool ladders.

SS-100M

Made in four ratings: 0.75 kW (1 HP), 1.1 kW (1.5 HP) and 1.5 kW (2 HP) single-phase, and 2.2 kW (3 HP) three-phase. SuperStar swimming-pool pump, 0.75 kW (1 HP), 220 V single phase 50 Hz. Read flow and head at your working point from the performance curve on this page.

SS-150M

Made in four ratings: 0.75 kW (1 HP), 1.1 kW (1.5 HP) and 1.5 kW (2 HP) single-phase, and 2.2 kW (3 HP) three-phase. SuperStar swimming-pool pump, 1.1 kW (1.5 HP), 220 V single phase 50 Hz. Read flow and head at your working point from the performance curve on this page.

SS-200M

Made in four ratings: 0.75 kW (1 HP), 1.1 kW (1.5 HP) and 1.5 kW (2 HP) single-phase, and 2.2 kW (3 HP) three-phase. SuperStar swimming-pool pump, 1.5 kW (2 HP), 220 V single phase 50 Hz. Read flow and head at your working point from the performance curve on this page.

SS-300T

Made in four ratings: 0.75 kW (1 HP), 1.1 kW (1.5 HP) and 1.5 kW (2 HP) single-phase, and 2.2 kW (3 HP) three-phase. SuperStar swimming-pool pump, 2.2 kW (3 HP), 380 V three phase 50 Hz. Read flow and head at your working point from the performance curve on this page.

HF-100M

Made in four ratings: 0.75 kW (1 HP), 1.1 kW (1.5 HP) and 1.5 kW (2 HP) single-phase, and 2.2 kW (3 HP) three-phase. HyperFlow swimming-pool pump, 0.75 kW (1 HP), 220 V single phase 50 Hz. Read flow and head at your working point from the performance curve on this page.

HF-150M

Made in four ratings: 0.75 kW (1 HP), 1.1 kW (1.5 HP) and 1.5 kW (2 HP) single-phase, and 2.2 kW (3 HP) three-phase. HyperFlow swimming-pool pump, 1.1 kW (1.5 HP), 220 V single phase 50 Hz. Read flow and head at your working point from the performance curve on this page.

HF-200M

Made in four ratings: 0.75 kW (1 HP), 1.1 kW (1.5 HP) and 1.5 kW (2 HP) single-phase, and 2.2 kW (3 HP) three-phase. HyperFlow swimming-pool pump, 1.5 kW (2 HP), 220 V single phase 50 Hz. Read flow and head at your working point from the performance curve on this page.

HF-300T

Made in four ratings: 0.75 kW (1 HP), 1.1 kW (1.5 HP) and 1.5 kW (2 HP) single-phase, and 2.2 kW (3 HP) three-phase. HyperFlow swimming-pool pump, 2.2 kW (3 HP), 380 V three phase 50 Hz. Read flow and head at your working point from the performance curve on this page.

T500-20

Made in five sizes: Ø500, 600, 750, 900 and 1050 mm (20, 24, 30, 36 and 42 inch), rated from 10 to 43.5 m³/h. Filament-wound top-mount sand filter, 20 inch (Ø500 mm). Rated flow 10 m³/h, filtration area 0.2 m², supplied with a 6-way 1.5 inch multiport valve (filter, backwash, rinse, recirculate, waste, closed).

T600-24

Made in five sizes: Ø500, 600, 750, 900 and 1050 mm (20, 24, 30, 36 and 42 inch), rated from 10 to 43.5 m³/h. Filament-wound top-mount sand filter, 24 inch (Ø600 mm). Rated flow 14 m³/h, filtration area 0.28 m², supplied with a 6-way 1.5 inch multiport valve (filter, backwash, rinse, recirculate, waste, closed).

T750-30a

Made in five sizes: Ø500, 600, 750, 900 and 1050 mm (20, 24, 30, 36 and 42 inch), rated from 10 to 43.5 m³/h. Filament-wound top-mount sand filter, 30 inch (Ø750 mm). Rated flow 22 m³/h, filtration area 0.44 m², supplied with a 6-way 1.5 or 2 inch multiport valve (filter, backwash, rinse, recirculate, waste, closed).

T900-36

Made in five sizes: Ø500, 600, 750, 900 and 1050 mm (20, 24, 30, 36 and 42 inch), rated from 10 to 43.5 m³/h. Filament-wound top-mount sand filter, 36 inch (Ø900 mm). Rated flow 32 m³/h, filtration area 0.64 m², supplied with a 6-way 2 inch multiport valve (filter, backwash, rinse, recirculate, waste, closed).

T1005-42

Made in five sizes: Ø500, 600, 750, 900 and 1050 mm (20, 24, 30, 36 and 42 inch), rated from 10 to 43.5 m³/h. Filament-wound top-mount sand filter, 42 inch (Ø1050 mm). Rated flow 43.5 m³/h, filtration area 0.87 m², supplied with a 6-way 2 inch multiport valve (filter, backwash, rinse, recirculate, waste, closed).

WS-1200

Made in five sizes: Ø1200, 1400, 1600, 1800 and 2000 mm. Filament-wound side-mount commercial sand filter, Ø1200 mm, for hotel, club and municipal pools. The fibreglass-wound tank is corrosion-free and pressure-tested before dispatch; the side-mounted multiport valve lets the lid be opened for media changes without disturbing the pipework.

WS-1400

Made in five sizes: Ø1200, 1400, 1600, 1800 and 2000 mm. Filament-wound side-mount commercial sand filter, Ø1400 mm, for hotel, club and municipal pools. The fibreglass-wound tank is corrosion-free and pressure-tested before dispatch; the side-mounted multiport valve lets the lid be opened for media changes without disturbing the pipework.

WS-1600

Made in five sizes: Ø1200, 1400, 1600, 1800 and 2000 mm. Filament-wound side-mount commercial sand filter, Ø1600 mm, for large hotel, resort and competition pools. The fibreglass-wound tank is corrosion-free and pressure-tested before dispatch; the side-mounted multiport valve lets the lid be opened for media changes without disturbing the pipework.

WS-1800

Made in five sizes: Ø1200, 1400, 1600, 1800 and 2000 mm. Filament-wound side-mount commercial sand filter, Ø1800 mm, for large resort, water-park and competition pools. The fibreglass-wound tank is corrosion-free and pressure-tested before dispatch; the side-mounted multiport valve lets the lid be opened for media changes without disturbing the pipework.

WS-2000

Made in five sizes: Ø1200, 1400, 1600, 1800 and 2000 mm. Filament-wound side-mount commercial sand filter, Ø2000 mm — the largest in the Waterstar range, for Olympic, water-park and large resort pools. The fibreglass-wound tank is corrosion-free and pressure-tested before dispatch; the side-mounted multiport valve lets the lid be opened for media changes without disturbing the pipework.

MPV-T-15

Made in four versions: top-mount or side-mount, each with 1.5 inch or 2 inch ports. Control unit for managing the pool water system. The top-mount valve seats in the groove on top of the filter with an easy-to-fit two-arm gasket and a port for the pressure gauge.

MPV-T-2

Made in four versions: top-mount or side-mount, each with 1.5 inch or 2 inch ports. Top-mount control valve for larger filters. It seats in the groove on top of the filter with a gasketed two-arm clamp and a port for the pressure gauge, with three pipe connections (pool line, pump line, drain line), a 63 mm bottom connection for the filter tree pipe and 2 inch threaded heads.

MPV-S-15

Made in four versions: top-mount or side-mount, each with 1.5 inch or 2 inch ports. Side-mount control valve fitted to the side of the filter, with a single arm, an easy-to-fit gasket and a port for the pressure gauge. Three pipe connections (pool line, pump line, drain line), a 50 mm lower connection for the filter tree pipe and 1.5 inch threaded heads.

MPV-S-2

Made in four versions: top-mount or side-mount, each with 1.5 inch or 2 inch ports. Side-mount control valve for larger filters, fitted to the side of the filter with a gasketed clamp and a port for the pressure gauge. Three pipe connections (pool line, pump line, drain line), a 63 mm lower connection for the filter tree pipe and 2 inch threaded heads.

FM-4-8-25

Supplied in two grain sizes, 0.4–0.8 mm and 0.8–1.2 mm, in 25 kg bags. Graded silica sand for pool sand filters, 0.4–0.8 mm, 25 kg bag. This is the filtration grade used in all Waterstar residential top-mount filters (Ø500–Ø900 mm / 20"–36") and as the top filtration layer in commercial side-mount filters.

FM-8-12-25

Supplied in two grain sizes, 0.4–0.8 mm and 0.8–1.2 mm, in 25 kg bags. Graded silica sand/gravel for pool sand filters, 0.8–1.2 mm, 25 kg bag. A coarser grade, specified where the filter data sheet calls for an intermediate layer between the 1–2 mm gravel support bed and the 0.4–0.8 mm filtration sand, or for coarse pre-filtration duties. Washed and screened.

PG-1

Pressure gauge panel for monitoring filter pressure. Mounts on the filter or the manifold and shows the working pressure at a glance, signalling when the sand media is loaded and a backwash is due. Note the clean-filter reading after each backwash; when the needle climbs 0.5–0.7 bar above it, backwash again.

UWL-1

Made in two versions: for concrete pools and for liner pools. Underwater niche light for concrete pools. The niche is cast into the pool wall during construction and the lamp body seats inside it with cable glands and neoprene seals, so the assembly meets international safety practice for 12 V pool lighting and stays watertight for years in chlorinated water.

UWL-1-L

Made in two versions: for concrete pools and for liner pools. Underwater niche light for liner (vinyl) pools. The niche clamps the liner between a flanged body and a gasketed front ring, so the membrane stays watertight around the opening, and the lamp seats inside with cable glands and neoprene seals to international safety practice for 12 V pool lighting.

LL-18

Made in three powers: 18 W, 24 W and 36 W. Nicheless underwater LED light, 18 W, 12–14 V AC, IP68, with 3 m cable, in warm-white or cool-white. Being nicheless it needs no light niche, so it suits new builds and retrofits on concrete and liner pools alike.

LL-24

Made in three powers: 18 W, 24 W and 36 W. Nicheless underwater LED light, 24 W, 12–14 V AC, IP68, with 3 m cable, in warm-white or cool-white. Being nicheless it needs no light niche, so it suits new builds and retrofits on concrete and liner pools alike.

LL-36

Made in three powers: 18 W, 24 W and 36 W. Nicheless underwater LED light, 36 W, 12–14 V AC, IP68, with 3 m cable, in warm-white or cool-white — the most powerful lamp in the range, for large residential, hotel and commercial pools. Being nicheless it needs no light niche in the wall.

LB-18

Made in three powers: 18 W, 24 W and 36 W. Replacement LED bulb, 18 W, 12 V, for Waterstar niche underwater lights. Transparent lens, available in warm white or cool white, with full brass connectors that will not corrode in chlorinated water.

LB-24

Made in three powers: 18 W, 24 W and 36 W. Replacement LED bulb, 24 W, 12 V, for Waterstar niche underwater lights. Transparent lens, available in warm white or cool white, with full brass connectors that will not corrode in chlorinated water.

LB-36

Made in three powers: 18 W, 24 W and 36 W. Replacement LED bulb, 36 W, 12 V, for Waterstar niche underwater lights. Transparent lens, available in warm white or cool white, with full brass connectors that will not corrode in chlorinated water.

T-1-300

Safety isolating transformer, 200 W, for underwater lights in swimming pools, fountains and spas. It steps the mains supply down to 12 V through a galvanically isolated winding, so no mains potential can reach the water even if a lamp seal fails — the arrangement required by pool-lighting safety practice.

JB-1

Junction box for 12 V pool lighting — the most cost-effective way to feed several underwater lights from one safety transformer. The redesigned junction-box transformer cuts energy loss, and the sealed enclosure gives each lamp cable its own gland and terminal, so a lamp can be changed without disturbing the others.

SKIM-1

Made in four versions: for concrete or liner pools, each with a standard (200 × 140 mm) or wide (350 × 175 mm) mouth. Standard skimmer for concrete pools with a 20 × 14 cm inlet opening — the model professional builders specify most often.

SKIM-1-W

Made in four versions: for concrete or liner pools, each with a standard (200 × 140 mm) or wide (350 × 175 mm) mouth. Wide-mouth skimmer for concrete pools with a 17.5 × 35 cm inlet opening — roughly twice the intake of a standard skimmer, so it clears the surface faster on larger or leaf-prone pools.

SKIM-1-L

Made in four versions: for concrete or liner pools, each with a standard (200 × 140 mm) or wide (350 × 175 mm) mouth. Standard skimmer for liner (vinyl) pools with a 20 × 14 cm inlet opening.

SKIM-1-WL

Made in four versions: for concrete or liner pools, each with a standard (200 × 140 mm) or wide (350 × 175 mm) mouth. Wide-mouth skimmer for liner (vinyl) pools with a 17.5 × 35 cm inlet opening — roughly twice the intake of a standard skimmer, so it clears the surface faster on larger or leaf-prone pools.

SKIM-2-C

Made in four versions: for concrete or liner pools, each with a standard (148 × 143 mm) or wide (300 × 185 mm) mouth. Standard skimmer for concrete pools, customizable, engineered for residential and professional use. Inlet opening 143 × 148 mm with a 1.5 inch outlet.

SKIM-2-CL

Made in four versions: for concrete or liner pools, each with a standard (148 × 143 mm) or wide (300 × 185 mm) mouth. Wide-mouth skimmer for concrete pools, customizable, with a 185 × 300 mm inlet opening and a 1.5 inch outlet.

SKIM-2-L

Made in four versions: for concrete or liner pools, each with a standard (148 × 143 mm) or wide (300 × 185 mm) mouth. Standard skimmer for liner (vinyl) pools, customizable, with a 143 × 148 mm inlet opening and a 1.5 inch outlet.

SKIM-2-WL

Made in four versions: for concrete or liner pools, each with a standard (148 × 143 mm) or wide (300 × 185 mm) mouth. Wide-mouth skimmer for liner (vinyl) pools, customizable, with a 185 × 300 mm inlet opening and a 1.5 inch outlet. The wide mouth takes in roughly twice the surface flow of a standard skimmer, clearing leaves and floating debris faster on large liner and panel pools.

SKIM-01

Extension piece that lengthens the throat of the Mini Skimmer. Glued into a 148 × 143 mm skimmer throat with plastic solvent cement. Throat 148 × 143 mm, length 195 mm. Use it where the finished wall thickness places the skimmer body further back from the pool face.

SKIM-02

Wide-mouth extension for the Mini Skimmer. Fits the 148 × 143 mm Mini Skimmer throat and presents the wide 300 × 185 mm mouth opening, giving the larger surface-skimming intake without changing the skimmer body. Supplied as an add-on part; the factory-assembled equivalent is the wide-mouth Mini Skimmer (SKIM-2-CL / SKIM-2-WL).

F-35

Self-standing filtration unit without pump — a complete filter station on its own base, with a fibreglass filter tank in a customizable colour and a multiport valve already piped, so the installer only connects the suction and return lines and the pump of choice. The wound tank resists UV and weather, which makes the unit suitable for open plant areas beside villa and hotel pools.

FV-1-L

Oval vacuum cleaner head for liner (vinyl) pools, polyethylene, with a built-in brush and internal weights for easy underwater cleaning. The curved edges reach into the tight corners and radiused coves of liner pools where a square head cannot, and the smooth base and brush lift settled dust without scuffing or creasing the membrane.

FV-1-12

Made in two widths: 12 inch and 19 inch. Flexible vacuum head, 12 inch (about 30 cm), polyethylene, with 8 wheels and 4 lead weights under 6 ABS covers, for manual vacuuming of pool floors. The weights keep the head on the floor under suction and the wheels let it glide without scuffing tiles, mosaic or liner; the flexible body follows the floor-to-wall cove.

FV-1-19

Made in two widths: 12 inch and 19 inch. Flexible vacuum head, 19 inch (about 48 cm), polyethylene, with 12 wheels and 6 lead weights under 10 ABS covers, for manual vacuuming of large pool floors.

HC-1

Hydro Vac cleaning head — a weighted vacuum head with brushes and multiple suction ports that glides over tiled, painted and liner floors, lifting settled dirt into the vacuum hose without scratching the finish. Connects to the standard telescopic handle and a Waterstar vacuum hose (6–25 m) through the skimmer or vacuum point. Vacuum slowly in overlapping passes so fine dust is not stirred up.

CM-15

Curved Master wide wall brush — a wide, curved brush head that follows the radius of pool walls and the wall-to-floor cove, so algae film and settled dust are lifted in one pass instead of several. Fits the standard telescopic handle. Brush the walls before vacuuming and before a chlorine shock so the sanitizer reaches the loosened deposit.

CB-1-18

Streamline curved wall brush, 18 inch (about 45 cm), with polypropylene bristles on an ABS back for extra strength, for scrubbing algae film and settled dirt off pool walls, steps and the wall-to-floor cove. The curved head follows the radius of the cove where dirt collects first, and the easy clip fixes it to the 29 mm Waterstar telescopic handle.

DLF-5

Made in two types: deep bag and flat. Deep leaf skimmer net (leaf rake) for lifting sunken leaves, twigs and debris off the pool floor. The deep bag holds a large load in one lift, so a pool that has been left after a storm can be cleared without the debris slipping back, and the reinforced front edge scoops without scratching tiles or liner.

LS-2

Made in two types: deep bag and flat. Flat leaf skimmer net for removing floating debris from the pool surface — leaves, insects, pollen and blown dust — before it sinks and loads the filter. The shallow frame skims the top few centimetres with little drag, so a whole villa pool is cleared in a few passes, and the fine mesh holds small particles.

TH-2-5

Made in two lengths: 2.5–5 m and 5–10 m. Waterstar all-purpose telescopic aluminium handle for cleaning the pool floor and walls at any depth. The anodised aluminium tube resists chlorinated water and sun, the twist-lock collar fixes the length wherever it is set, and the standard 29 mm end takes the full range of Waterstar leaf skimmers, vacuum heads and brushes with the same push-clip.

TH-2-10

Made in two lengths: 2.5–5 m and 5–10 m. Waterstar all-purpose telescopic aluminium handle for cleaning the pool floor and walls at any depth. The anodised aluminium tube resists chlorinated water and sun, the twist-lock collar fixes the length wherever it is set, and the standard 29 mm end takes the full range of Waterstar leaf skimmers, vacuum heads and brushes with the same push-clip.

VH-6

Made in four lengths: 6, 12, 15 and 25 m. Flexible pool vacuum hose, 6 m, for manual vacuuming with a vacuum head and telescopic handle through the skimmer or a dedicated vacuum point. Spiral-reinforced so it does not collapse under suction, with swivel cuffs that stop it twisting while you work. Choose a length that reaches the far corner of the pool from the vacuum point.

VH-12

Made in four lengths: 6, 12, 15 and 25 m. Flexible pool vacuum hose, 12 m, for manual vacuuming with a vacuum head and telescopic handle through the skimmer or a dedicated vacuum point. Spiral-reinforced so it does not collapse under suction, with swivel cuffs that stop it twisting while you work. Choose a length that reaches the far corner of the pool from the vacuum point.

VH-15

Made in four lengths: 6, 12, 15 and 25 m. Flexible pool vacuum hose, 15 m, for manual vacuuming with a vacuum head and telescopic handle through the skimmer or a dedicated vacuum point. Spiral-reinforced so it does not collapse under suction, with swivel cuffs that stop it twisting while you work. Choose a length that reaches the far corner of the pool from the vacuum point.

VH-25

Made in four lengths: 6, 12, 15 and 25 m. Flexible pool vacuum hose, 25 m, for manual vacuuming of large residential, hotel and commercial pools with a vacuum head and telescopic handle through the skimmer or a dedicated vacuum point. Spiral-reinforced so it does not collapse under suction, with swivel cuffs that stop it twisting while you work.

AC-12

Made in two capacities: 12 tablets and 24 tablets. Off-line automatic chlorinator, 12-tablet capacity, for sanitising pool and spa water and cutting the daily dosing routine. It is plumbed as a bypass on the return line after the filter and heater, and a control valve sets how much water flows over the trichlor tablets, so the chlorine feed can be turned up in summer and down in winter.

AC-24

Made in two capacities: 12 tablets and 24 tablets. Off-line automatic chlorinator, 24-tablet capacity, for sanitising pool and spa water and cutting the daily dosing routine. It is plumbed as a bypass on the return line after the filter and heater, and a control valve sets how much water flows over the trichlor tablets, so the chlorine feed can be turned up in summer and down in winter.

TK-1

Professional test kit for free chlorine and pH, the two readings that decide whether pool water is safe and comfortable. Includes the OTO reagent for chlorine, phenol red for pH, the comparator block and colour scale. Take the sample at elbow depth away from the inlets, add the reagent, and read against the scale in daylight: aim for 1–3 mg/l free chlorine and pH 7.2–7.6.

T-10

Floating pool thermometer for measuring swimming-pool and spa water temperature. Read it at the same time each day to keep the water in the comfort range and to size heating or chiller run-times; water temperature also affects chlorine demand and the calcium balance, so it belongs on every maintenance checklist.

SW-1

Competition swim lane line. Each metre carries 10 floaters and 10 donut floaters on a nylon or stainless-steel cable, with all fittings in AISI 304 stainless. The floaters absorb the wave from the neighbouring lane so swimmers are not slowed by the wash, and the alternating colours mark the 5 m and 15 m zones when assembled to the standard pattern.

ACC-1

Made in two versions: for concrete pools and for liner pools. Anchor cup for concrete pools — the socket that is cast into the pool deck or wall to receive lane-line hooks, safety-rope hooks and pool ladders, finishing flush with the deck so nothing protrudes when the accessory is removed.

ACL-1

Made in two versions: for concrete pools and for liner pools. Anchor cup for liner (vinyl) pools — the same lane-line and safety-rope socket as the concrete version, with a flanged body and sealing gasket that clamps the liner between two faces so the membrane stays watertight.

SH-1

Wire lock for competition lane lines — clamps the lane-line cable at the required length and locks it against the tensioning fitting so the line cannot slip once tensioned. Corrosion-resistant for chlorinated water; fit one at each end of the lane line together with the stainless-steel spring and front line stabilizer.

SS-1

Stainless-steel tension spring for competition lane lines — absorbs the shock loads from swimmers and turns, keeps the lane line under constant tension and protects the anchor cups and hooks from overload. Corrosion-resistant stainless steel for chlorinated pool water; fit one at each end of every lane line.

FLS-1

Front line stabilizer for competition lane lines — the end fitting that sits between the lane rope and the anchor-cup hook, keeping the line taut and level so the discs stay in position and wave-quelling performance is maintained across the lane. Used with the stainless-steel spring and wire lock at each end of the lane line.

LR-1

Float lane roller in stainless steel AISI 304, 1.3 m diameter and 1.2 m wide, holding 25 m of lane rope per reel. The roller stores competition lane lines off the deck between sessions, so the floaters are not crushed underfoot and the cables do not kink, and one person can reel a line in or pay it out along the pool in a minute.

SB-1-40

Starting block, 40 cm, one-step, with a fibre-reinforced polyester anti-slip platform on a stainless steel base, for training and competition pools. The platform's textured top gives swimmers a secure push-off and the 40 cm height suits club and school pools where the deck-to-water distance is modest.

OFG-2-WHT

Made in three models (Nefertiti, Cleopatra and Hatshepsut), three profiles (H23 × W240, H22 × W245 and H38 × W290 mm) and five colours (white, blue, yellow, navy and off-white) — 20 combinations in all. Overflow grating, Nefertiti model — skims the water surface of deck-level and infinity pools by letting the overflowing water fall through into the gutter, taking floating impurities with it.

OFG-2-BLU

Made in three models (Nefertiti, Cleopatra and Hatshepsut), three profiles (H23 × W240, H22 × W245 and H38 × W290 mm) and five colours (white, blue, yellow, navy and off-white) — 20 combinations in all. Overflow grating, Nefertiti model — skims the water surface of deck-level and infinity pools by letting the overflowing water fall through into the gutter, taking floating impurities with it.

OFG-2-YEL

Made in three models (Nefertiti, Cleopatra and Hatshepsut), three profiles (H23 × W240, H22 × W245 and H38 × W290 mm) and five colours (white, blue, yellow, navy and off-white) — 20 combinations in all. Overflow grating, Nefertiti model — skims the water surface of deck-level and infinity pools by letting the overflowing water fall through into the gutter, taking floating impurities with it.

OFG-2-NAV

Made in three models (Nefertiti, Cleopatra and Hatshepsut), three profiles (H23 × W240, H22 × W245 and H38 × W290 mm) and five colours (white, blue, yellow, navy and off-white) — 20 combinations in all. Overflow grating, Nefertiti model — skims the water surface of deck-level and infinity pools by letting the overflowing water fall through into the gutter, taking floating impurities with it.

OFG-2-OFW

Made in three models (Nefertiti, Cleopatra and Hatshepsut), three profiles (H23 × W240, H22 × W245 and H38 × W290 mm) and five colours (white, blue, yellow, navy and off-white) — 20 combinations in all. Overflow grating, Nefertiti model — skims the water surface of deck-level and infinity pools by letting the overflowing water fall through into the gutter, taking floating impurities with it.

OFG-3-WHT

Made in three models (Nefertiti, Cleopatra and Hatshepsut), three profiles (H23 × W240, H22 × W245 and H38 × W290 mm) and five colours (white, blue, yellow, navy and off-white) — 20 combinations in all. Overflow grating, Cleopatra model — polypropylene single-spine grating, 22 mm high and 245 mm wide, 42 pieces per metre, for the overflow channel of deck-level and infinity pools.

OFG-3-BLU

Made in three models (Nefertiti, Cleopatra and Hatshepsut), three profiles (H23 × W240, H22 × W245 and H38 × W290 mm) and five colours (white, blue, yellow, navy and off-white) — 20 combinations in all. Overflow grating, Cleopatra model — polypropylene single-spine grating, 22 mm high and 245 mm wide, 42 pieces per metre, for the overflow channel of deck-level and infinity pools.

OFG-3-YEL

Made in three models (Nefertiti, Cleopatra and Hatshepsut), three profiles (H23 × W240, H22 × W245 and H38 × W290 mm) and five colours (white, blue, yellow, navy and off-white) — 20 combinations in all. Overflow grating, Cleopatra model — polypropylene single-spine grating, 22 mm high and 245 mm wide, 42 pieces per metre, for the overflow channel of deck-level and infinity pools.

OFG-3-NAV

Made in three models (Nefertiti, Cleopatra and Hatshepsut), three profiles (H23 × W240, H22 × W245 and H38 × W290 mm) and five colours (white, blue, yellow, navy and off-white) — 20 combinations in all. Overflow grating, Cleopatra model — polypropylene single-spine grating, 22 mm high and 245 mm wide, 42 pieces per metre, for the overflow channel of deck-level and infinity pools.

OFG-3-OFW

Made in three models (Nefertiti, Cleopatra and Hatshepsut), three profiles (H23 × W240, H22 × W245 and H38 × W290 mm) and five colours (white, blue, yellow, navy and off-white) — 20 combinations in all. Overflow grating, Cleopatra model — polypropylene single-spine grating, 22 mm high and 245 mm wide, 42 pieces per metre, for the overflow channel of deck-level and infinity pools.

OFG-4-WHT

Made in three models (Nefertiti, Cleopatra and Hatshepsut), three profiles (H23 × W240, H22 × W245 and H38 × W290 mm) and five colours (white, blue, yellow, navy and off-white) — 20 combinations in all.

OFG-4-BLU

Made in three models (Nefertiti, Cleopatra and Hatshepsut), three profiles (H23 × W240, H22 × W245 and H38 × W290 mm) and five colours (white, blue, yellow, navy and off-white) — 20 combinations in all.

OFG-4-YEL

Made in three models (Nefertiti, Cleopatra and Hatshepsut), three profiles (H23 × W240, H22 × W245 and H38 × W290 mm) and five colours (white, blue, yellow, navy and off-white) — 20 combinations in all.

OFG-4-NAV

Made in three models (Nefertiti, Cleopatra and Hatshepsut), three profiles (H23 × W240, H22 × W245 and H38 × W290 mm) and five colours (white, blue, yellow, navy and off-white) — 20 combinations in all.

OFG-4-OFW

Made in three models (Nefertiti, Cleopatra and Hatshepsut), three profiles (H23 × W240, H22 × W245 and H38 × W290 mm) and five colours (white, blue, yellow, navy and off-white) — 20 combinations in all.

OFG-3-290-WHT

Made in three models (Nefertiti, Cleopatra and Hatshepsut), three profiles (H23 × W240, H22 × W245 and H38 × W290 mm) and five colours (white, blue, yellow, navy and off-white) — 20 combinations in all. Hatshepsut overflow grating, 38 mm high × 290 mm wide, for the overflow channel of deck-level and infinity pools.

OFG-3-290-BLU

Made in three models (Nefertiti, Cleopatra and Hatshepsut), three profiles (H23 × W240, H22 × W245 and H38 × W290 mm) and five colours (white, blue, yellow, navy and off-white) — 20 combinations in all. Hatshepsut overflow grating, 38 mm high × 290 mm wide, for the overflow channel of deck-level and infinity pools.

OFG-3-290-YEL

Made in three models (Nefertiti, Cleopatra and Hatshepsut), three profiles (H23 × W240, H22 × W245 and H38 × W290 mm) and five colours (white, blue, yellow, navy and off-white) — 20 combinations in all. Hatshepsut overflow grating, 38 mm high × 290 mm wide, for the overflow channel of deck-level and infinity pools.

OFG-3-290-NAV

Made in three models (Nefertiti, Cleopatra and Hatshepsut), three profiles (H23 × W240, H22 × W245 and H38 × W290 mm) and five colours (white, blue, yellow, navy and off-white) — 20 combinations in all. Hatshepsut overflow grating, 38 mm high × 290 mm wide, for the overflow channel of deck-level and infinity pools.

OFG-3-290-OFW

Made in three models (Nefertiti, Cleopatra and Hatshepsut), three profiles (H23 × W240, H22 × W245 and H38 × W290 mm) and five colours (white, blue, yellow, navy and off-white) — 20 combinations in all. Hatshepsut overflow grating, 38 mm high × 290 mm wide, for the overflow channel of deck-level and infinity pools.

FG-1

Made in two sizes: 9 × 9 inch and 18 × 18 inch. Frame and grate floor drain, 9 × 9 inch (approx. 230 × 230 mm), in heavy-duty non-corrosive ABS, fixed with stainless steel screws. Used as a main drain cover in concrete pools and as a floor outlet in balance tanks, plant rooms and deck areas.

FG-2

Made in two sizes: 9 × 9 inch and 18 × 18 inch. Frame and grate floor drain, 18 × 18 inch (approx. 457 × 457 mm), in heavy-duty non-corrosive ABS, fixed with stainless steel screws.

GD-1

Gutter drain for the overflow channel of deck-level and infinity pools, moulded in chemical- and UV-resistant plastic, for a 63 mm solvent-weld pipe. The drain sits in the floor of the overflow gutter under the grating and carries the skimmed surface water down to the balance tank.

WI-1

Made in five versions: for concrete pools with a 50 mm, 2 inch or 63 mm connection, and for liner pools with a 50 mm or 1.5 inch connection. Wall inlet (return inlet), ABS, with a directional flow ball, for a 50 mm pipe with a 2 inch outside thread. Rated flow 5 m³/h.

WI-2

Made in five versions: for concrete pools with a 50 mm, 2 inch or 63 mm connection, and for liner pools with a 50 mm or 1.5 inch connection. Wall inlet (return inlet) for concrete pools with a directional flow ball, UV- and chemical-resistant, solvent-welded inside a 2 inch pipe. Rated flow 7 m³/h.

WI-3

Made in five versions: for concrete pools with a 50 mm, 2 inch or 63 mm connection, and for liner pools with a 50 mm or 1.5 inch connection. Wall inlet (return inlet) with a directional flow ball, UV- and chemical-resistant, solvent-welded inside a 63 mm pipe. Rated flow 7 m³/h.

WI-1-L

Made in five versions: for concrete pools with a 50 mm, 2 inch or 63 mm connection, and for liner pools with a 50 mm or 1.5 inch connection. Wall inlet (return inlet) for liner (vinyl) pools, ABS, with lock nut and directional flow ball, for a 50 mm or 1.5 inch solvent-weld pipe.

WI-2-L

Made in five versions: for concrete pools with a 50 mm, 2 inch or 63 mm connection, and for liner pools with a 50 mm or 1.5 inch connection. Wall inlet (return inlet) for liner (vinyl) pools, ABS, with lock nut and directional flow ball, for a 1.5 inch solvent-weld pipe.

FI-1

Made in four versions: for concrete pools with an inch-pipe, metric-pipe or 63 mm (Hydro Storm) connection, and for liner pools with a 50 mm connection. Floor inlet (return inlet), ABS, with adjustable flow. 2 inch outside thread, connecting to a 1.5 inch solvent-weld pipe.

FI-3

Made in four versions: for concrete pools with an inch-pipe, metric-pipe or 63 mm (Hydro Storm) connection, and for liner pools with a 50 mm connection. Floor inlet (return inlet), ABS, with adjustable flow. 2 inch outside thread, connecting to a 50 mm metric solvent-weld pipe.

FI-2

Made in four versions: for concrete pools with an inch-pipe, metric-pipe or 63 mm (Hydro Storm) connection, and for liner pools with a 50 mm connection. ABS floor inlet (Hydrostorm) with adjustable flow, welded inside a 63 mm PVC pipe.

FI-2-L

Made in four versions: for concrete pools with an inch-pipe, metric-pipe or 63 mm (Hydro Storm) connection, and for liner pools with a 50 mm connection. ABS floor inlet for liner (vinyl) pools with adjustable flow, for a 50 mm weld pipe.

VP-1

Made in five versions: for concrete pools with a 50 mm, 2 inch or 63 mm connection, and for liner pools with a 1.5 inch threaded or 50 mm solvent-weld connection. Vacuum point for concrete pools, moulded in UV- and chemical-resistant plastic, with a 50 mm pipe glued inside; used with a 1.5 inch vacuum hose.

VP-2

Made in five versions: for concrete pools with a 50 mm, 2 inch or 63 mm connection, and for liner pools with a 1.5 inch threaded or 50 mm solvent-weld connection. Vacuum point for concrete pools, moulded in UV- and chemical-resistant plastic, glued inside a 2 inch pipe; the cover removes to connect a 1.5 inch vacuum hose.

VP-3

Made in five versions: for concrete pools with a 50 mm, 2 inch or 63 mm connection, and for liner pools with a 1.5 inch threaded or 50 mm solvent-weld connection. Vacuum point for concrete pools, moulded in UV- and chemical-resistant plastic, glued inside a 63 mm pipe; used with a 1.5 inch vacuum hose.

VP-1-L-THR

Made in five versions: for concrete pools with a 50 mm, 2 inch or 63 mm connection, and for liner pools with a 1.5 inch threaded or 50 mm solvent-weld connection. Vacuum point for liner (vinyl) pools, ABS, with a 1.5 inch threaded cover and lock nut, for a 50 mm pipe. The flanged body and gasket clamp the liner between two faces so the membrane stays watertight around the fitting.

VP-1-L-WLD

Made in five versions: for concrete pools with a 50 mm, 2 inch or 63 mm connection, and for liner pools with a 1.5 inch threaded or 50 mm solvent-weld connection. ABS vacuum point for liner (vinyl) pools with lock nut, welded to a 50 mm PVC pipe.

MD-1-L

Made in two versions: for concrete pools and for liner pools. Round main drain for liner (vinyl) pools, ABS, with a 170 mm anti-vortex suction grille and a 2 inch internal thread.

DRN-CN-ST-ST

Made in two versions: for concrete pools and for liner pools. Main drain for concrete pools — the suction outlet set into the pool floor at its deepest point, cast into the slab and finished flush so nothing protrudes.

WAJ

Concrete spa fitting — water/air jet mixer (venturi tee) for spa and jacuzzi pools, solvent-welded to a 1.5 inch pipe. Pressurised water from the spa pump passes through the venturi, draws air in from the air line and delivers the aerated stream to the jet nozzle for the hydro-massage effect.

JN-1

Return inlet jet nozzle for the water/air jet mixers in concrete spas and pools. The ABS directional flow ball fits inside a 1.5 inch pipe and turns to aim the aerated stream at the bather's back, shoulders or feet, so each seat can be tuned after the spa is filled.

AC

Adjustable 3/4 inch air controller for spa and jacuzzi pools, used to set the air rate drawn into the hydro-massage jets. Includes body, plastic nut and adjustable air regulator. It sits in the spa surround above the water line on the air line feeding the jets; turning the cap opens or closes the air path, from a soft flow to a vigorous bubbling massage.

APB-1

Pneumatic air push button for spa and jacuzzi pools — switches the air blower (or a pump) on and off from the spa edge without any electrical contact near the water. Pressing the button sends a pulse of air down a small-bore tube to a pneumatic switch in the plant room, which is what makes it safe for wet hands.

DS-THR

Made in two connections: 1.5 inch threaded and 50 mm solvent-weld. Anti-vortex spa drain, 1.5 inch threaded connection, for spa and jacuzzi pools. The domed anti-vortex cover spreads suction over its whole surface so hair and limbs cannot be held against it — the arrangement expected by entrapment-safety practice; always pair two drains on one line in a spa.

DS-WLD

Made in two connections: 1.5 inch threaded and 50 mm solvent-weld. Anti-vortex spa drain, solvent-weld connection for 50 mm PVC pipe, for spa and jacuzzi pools. The domed anti-vortex cover spreads suction over its whole surface so hair and limbs cannot be held against it — the arrangement expected by entrapment-safety practice; always pair two drains on one line in a spa.

CV-50

Made in four sizes: 50 mm, 1.5 inch, 63 mm and 2 inch. Check valve (non-return valve), 50 mm inlet and outlet, for pool pipework. Two glued halves with a transparent body, so the gate can be seen closing and any leak-back confirmed without dismantling.

CV-1.5

Made in four sizes: 50 mm, 1.5 inch, 63 mm and 2 inch. Check valve (non-return valve), 1.5 inch inlet and outlet, for pool pipework. Two glued halves with a transparent body, so the gate can be seen closing and any leak-back confirmed without dismantling.

CV-63

Made in four sizes: 50 mm, 1.5 inch, 63 mm and 2 inch. Check valve (non-return valve), 63 mm inlet and outlet, for pool pipework. Two glued halves with a transparent body, so the gate can be seen closing and any leak-back confirmed without dismantling.

CV-2

Made in four sizes: 50 mm, 1.5 inch, 63 mm and 2 inch. Check valve (non-return valve), 2 inch inlet and outlet, for pool pipework. Two glued halves with a transparent body, so the gate can be seen closing and any leak-back confirmed without dismantling.

LS.S. PS2

Made in three heights: 2, 3 and 4 steps. Pool ladder, 2 steps, with rails in stainless steel 304 and plastic anti-slip treads. Includes the deck mounting bases (anchor sockets) and stainless steel screws. The polished tubular rails give a firm hand-hold in and out of the water and the moulded treads stay grippy when wet.

LS.S. PS3

Made in three heights: 2, 3 and 4 steps. Pool ladder, 3 steps, with rails in stainless steel 304 and plastic anti-slip treads. Includes the deck mounting bases (anchor sockets) and stainless steel screws. The polished tubular rails give a firm hand-hold in and out of the water and the moulded treads stay grippy when wet.

LS.S. PS4

Made in three heights: 2, 3 and 4 steps. Pool ladder, 4 steps, with rails in stainless steel 304 and plastic anti-slip treads. Includes the deck mounting bases (anchor sockets) and stainless steel screws. The polished tubular rails give a firm hand-hold in and out of the water and the moulded treads stay grippy when wet.

PS

Replacement pool-ladder steps in polypropylene (PP), moulded with a non-slip tread and UV-stabilised for years of sun and chlorinated water. Fit standard Waterstar stainless-steel pool ladders; replace a cracked or worn step immediately, as a failed tread is one of the most common causes of pool-side injuries.