Waterstar logo — swimming pool equipment manufacturer in Egypt

Spa Fittings

Browse Waterstar's Spa Fittings range — pool equipment manufactured in Egypt and trusted across 13 countries in the MENA region.

WAI

Concrete spa fitting — water/air jet mixer (venturi tee) for spa and jacuzzi pools, solvent-welded to a 1.5 inch pipe. Pressurised water from the spa pump passes through the venturi, draws air in from the air line and delivers the aerated stream to the jet nozzle for the hydro-massage effect.

JN-1

Return inlet jet nozzle for the water/air jet mixers in concrete spas and pools. The ABS directional flow ball fits inside a 1.5 inch pipe and turns to aim the aerated stream at the bather's back, shoulders or feet, so each seat can be tuned after the spa is filled.

AC-SPA

Adjustable 3/4 inch air controller for spa and jacuzzi pools, used to set the air rate drawn into the hydro-massage jets. Includes body, plastic nut and adjustable air regulator.

APB-1

Pneumatic air push button for spa and jacuzzi pools — switches the air blower (or a pump) on and off from the spa edge without any electrical contact near the water.

DS-THR

Anti-vortex spa drain, 1.5 inch threaded connection, for spa and jacuzzi pools. The domed anti-vortex cover spreads suction over its whole surface so hair and limbs cannot be held against it — the arrangement expected by entrapment-safety practice; always pair two drains on one line in a spa.

DS-WLD

Anti-vortex spa drain, solvent-weld connection for 50 mm PVC pipe, for spa and jacuzzi pools. The domed anti-vortex cover spreads suction over its whole surface so hair and limbs cannot be held against it — the arrangement expected by entrapment-safety practice; always pair two drains on one line...