Waterstar logo — swimming pool equipment manufacturer in Egypt

Jet Nozzle

Product Code: JN-1

Category: Spa Fittings

Return inlet jet nozzle for the water/air jet mixers in concrete spas and pools. The ABS directional flow ball fits inside a 1.5 inch pipe and turns to aim the aerated stream at the bather's back, shoulders or feet, so each seat can be tuned after the spa is filled. Screw the nozzle into the mixer body after the tile finish is complete, and set all nozzles on one pump to similar angles so the jets deliver evenly.

Jet Nozzle — WaterstarJet Nozzle — JN-1 — WaterstarJet Nozzle — Waterstar

Specifications

MaterialABS treated against pool chemicals and UV
Supplied withBody, gaskets, plastic nut and screws

Volume: 0.0023 m³

Availability: In stock

Frequently asked questions

How does the water/air jet mixer work?

Pressurised water from the spa pump passes through the venturi in the WAJ mixer, draws air in from the air line and delivers the aerated stream to the jet nozzle for the hydro-massage effect. One mixer is cast into the spa wall behind each jet position, solvent-welded to 1.5 inch pipe.

What does the air controller do?

The AC air controller sits on the deck at the head of the air line and lets the bather set how much air the venturis draw — from a soft stream to a strong bubbling massage — without touching the pump. The APB-1 air push button switches the spa pump on and off pneumatically, so there is no electrical switch near the water.

How are the jet nozzles adjusted?

The JN-1 directional flow ball fits inside the 1.5 inch pipe and turns to aim the aerated stream at the bather's back, shoulders or feet, so each seat can be tuned after the spa is filled. Screw the nozzles in after the tile finish is complete and set all nozzles on one pump to similar angles so the jets deliver evenly.

You May Also Need