Mini Skimmer
Pool: Liner · Mouth: Standard (148 × 143 mm)
Available options
- Pool: Concrete, Liner
- Mouth: Standard (148 × 143 mm), Wide (300 × 185 mm)
Product Code: SKIM-2-L
Category: Skimmers
Made in four versions: for concrete or liner pools, each with a standard (148 × 143 mm) or wide (300 × 185 mm) mouth. Standard skimmer for liner (vinyl) pools, customizable, with a 143 × 148 mm inlet opening and a 1.5 inch outlet. The flanged body and gasketed face plate clamp the liner between two faces, so the membrane stays watertight around the opening while the skimmer draws the surface layer where leaves, dust, oils and sunscreen collect. Debris is held in a removable basket ahead of the pump; the weir flap keeps it from floating back when the pump stops. Fix the body to the panel or block wall at finished water level, one skimmer per about 25 m² of surface, and cut the liner only after the face plate is screwed down.
Specifications
| Material | Rugged ABS, uni-body, no submerged joints |
|---|
| Pool type | Liner |
|---|
| Supplied with | Face plate, gaskets and screws |
|---|
| Throat opening | 148 × 143 mm |
|---|
| Basket capacity | 15 litres |
|---|
Volume: 0.112 m³
Availability: Made to order
Frequently asked questions
Standard skimmer or wide-mouth?
The standard skimmer (SKIM-1, throat 200 × 140 mm, 15-litre basket, flap weir and vacuum plate) is the proven choice for most residential pools. The wide-mouth version captures a broader band of surface water per unit — specify it for large surface areas, heavy leaf fall from surrounding planting, or a prevailing wind that pushes debris to one end. The compact Mini Skimmer (SKIM-2, throat 148 × 143 mm) suits spas and small pools.
How many skimmers does a pool need?
Count from the water surface and the wind: every pool needs at least one, placed on the downwind side so the wind drives floating debris towards it, and large or L-shaped pools need more so no part of the surface is more than a few metres from a skimmer. Our engineers size the count from your pool drawing when you request a quotation.
Concrete or liner version?
Concrete versions cast into the wall shuttering and tile in flush with the finish. Liner versions (the -L models) add a flange and gasket set that clamps the membrane from both sides. The throat extensions SKIM-01 and SKIM-02 lengthen the throat where the finished wall thickness places the body further back from the pool face.
Can I vacuum the pool through the skimmer?
Yes — the standard skimmer ships with a vacuum plate. Lift out the basket, seat the plate, and connect the vacuum hose to it so the pump draws through the vacuum head. Set the multiport valve to Waste when vacuuming heavy dirt so it is not pushed into the sand bed.
