HyperFlow Pump
Power: 1.1 kW (1.5 HP)
Available options
- Power: 0.75 kW (1 HP), 1.1 kW (1.5 HP), 1.5 kW (2 HP), 2.2 kW (3 HP, 3-phase)
Product Code: HF-150M
Category: Pumps
Made in four ratings: 0.75 kW (1 HP), 1.1 kW (1.5 HP) and 1.5 kW (2 HP) single-phase, and 2.2 kW (3 HP) three-phase. HyperFlow swimming-pool pump, 1.1 kW (1.5 HP), 220 V single phase 50 Hz. Read flow and head at your working point from the performance curve on this page. A self-priming centrifugal pump with an integral strainer basket that traps leaves and hair before the impeller, so the filter sees clean flow and the basket is emptied without tools. Suited to residential pools up to the mid-size range and to spa circulation. Size the pump against the filter's rated flow and the pipe run — an oversized pump channels the sand bed and shortens filter cycles — and fit a check valve on the suction side when the pump sits above water level.
Specifications
| Inlet | 1.5" (DNI) |
|---|
| Speed | 2820 rpm |
|---|
| Phases | Single phase |
|---|
| Current | 6.6 – 6.0 A |
|---|
| Voltage | 220–240 V |
|---|
| Warranty | 2 years |
|---|
| Frequency | 50 Hz |
|---|
| Rated power | 1.5 HP (1.1 kW) |
|---|
| Run capacitor | 450 V |
|---|
| Overall L×W×H | 597 × 254 × 265 mm |
|---|
| Performance curve |  |
|---|
| Impeller / diffuser | HFP1007B / HFP1003B |
|---|
| Insulation / ingress | Class F / IP55 |
|---|
Volume: 0.06 m³
Availability: In stock
Frequently asked questions
Which pump size do I need for my pool?
Start from turnover: the whole pool volume should pass through the filter in about 8 hours for a residential pool, 6 hours for a commercial pool and 4 hours for a competition pool. Divide the volume in m³ by that time to get the flow in m³/h, then pick the pump whose curve delivers that flow at your system head — and never above the filter's rated flow. Waterstar pumps run from 1 HP (0.75 kW) to 3 HP (2.2 kW). The pool calculator on this site does the arithmetic.
What is the difference between the SuperStar and HyperFlow pumps?
Both are self-priming centrifugal pumps with an integral strainer basket, Class F insulation, IP55 protection and a 2-year warranty. The SuperStar has 2-inch inlet and outlet ports for larger pipework and higher flows; the HyperFlow uses 1.5-inch ports in a more compact body suited to residential pools and spa circulation. Each is offered in 1, 1.5, 2 and 3 HP.
Single-phase or three-phase?
The 1, 1.5 and 2 HP models run on 220–240 V single phase, 50 Hz (60 Hz on request). The 3 HP models (SS-300T and HF-300T) are three-phase 220/380 V, which suits hotel, club and semi-commercial plant rooms where a three-phase supply is available.
Can the pump be installed above the water level?
Yes — the pumps are self-priming. Keep the suction run short, fit a check valve on the suction line so the pump stays primed after a stop, and install the pump under cover with ventilation: IP55 protects against splashing and dust, not submersion. Empty the strainer basket weekly in season.
