Vacuum Hose
Length: 12 m
Available options
- Length: 6 m, 12 m, 15 m, 25 m
Product Code: VH-12
Category: Cleaning Equipment
Made in four lengths: 6, 12, 15 and 25 m. Flexible pool vacuum hose, 12 m, for manual vacuuming with a vacuum head and telescopic handle through the skimmer or a dedicated vacuum point. Spiral-reinforced so it does not collapse under suction, with swivel cuffs that stop it twisting while you work. Choose a length that reaches the far corner of the pool from the vacuum point.
Specifications
| Material | Polyethylene / ABS, UV and chemical resistant |
|---|
Volume: 0.05 m³
Availability: Made to order
Frequently asked questions
Which vacuum head should I use?
The flexible vacuum heads (FV-1-12 and FV-1-19, in 12 and 19 inch widths) follow the floor of tiled and painted pools; the oval head FV-1-L suits liner pools; the Hydro Vac HC-1 is a weighted head with brushes and multiple suction ports for fast cleaning of large floors. All fit the 29 mm end of the Waterstar telescopic handle with the same push-clip.
How do I choose the vacuum hose length?
Measure from the vacuum point or skimmer to the far corner of the pool and add a little slack: hoses come in 6, 12, 15 and 25 m. The spiral reinforcement stops the hose collapsing under suction and the swivel cuffs stop it twisting while you work.
Which telescopic handle length?
Choose the extended length that reaches the deepest point of the pool from the deck: TH-2-5 and TH-2-10 cover residential pools of the usual depths. The anodised aluminium tube resists chlorinated water and sun, and the twist-lock collar fixes the length wherever it is set.
How often should a pool be brushed and vacuumed?
Brush walls and floor weekly in season — the curved brushes CM-15 and CB-1-18 follow the wall-floor radius — and vacuum after brushing so the loosened dirt is removed rather than filtered slowly. Skim leaves daily with the DLF-5 or LS-2 leaf skimmer; it is faster than letting them sink and stain.
