Thermomètre
Product Code: T-10
Category: Traitement et analyse de l'eau
Thermomètre flottant pour mesurer la température de l'eau des piscines et des spas. Relevez-le à la même heure chaque jour pour maintenir l'eau dans la plage de confort et pour dimensionner les durées de fonctionnement du chauffage ou du refroidisseur ; la température de l'eau influe également sur la demande en chlore et l'équilibre calcique, elle doit donc figurer sur toute liste de contrôle d'entretien.
Volume: 0.001 m³
Availability: In stock
Frequently asked questions
AC-12 or AC-24 chlorinator?
The AC-12 holds twelve trichlor tablets and suits residential pools up to about 50 m³. The AC-24 holds twenty-four and suits villa pools above 50 m³, hotel and club pools. Both are plumbed as a bypass on the return line after the filter and heater, with a control valve that sets how much water flows over the tablets.
What readings should the water show?
Free chlorine 1–3 mg/l and pH 7.2–7.6. Inside that pH window chlorine sanitises efficiently and neither bathers nor equipment are affected. The TK-1 kit measures both with OTO and phenol red reagents: take the sample at elbow depth away from the inlets and read the comparator in daylight.
How often should I test?
Daily in season on hotel and club pools, and two or three times a week on a residential pool — always before adjusting the chlorinator dial. Log the readings; a trend tells you more than a single figure.
Can the chlorinator be used with a heater?
Yes, provided it sits downstream of the heater on the return line and a check valve is fitted between them, so chlorinated water cannot flow back into the heater when the pump stops.
