Bonde de spa (1,5" filetée)
Raccordement: 1,5" fileté
Product Code: DS-THR
Category: Pièces pour spa
Bonde de fond anti-vortex pour spa, raccordement fileté 1.5 pouce, pour spas et jacuzzis. Le couvercle bombé anti-vortex répartit l'aspiration sur toute sa surface afin que cheveux et membres ne puissent y rester plaqués — disposition attendue par les bonnes pratiques de sécurité anti-piégeage ; toujours associer deux bondes sur une même conduite dans un spa. Comprend le corps, les joints, l'écrou plastique et les vis. À poser au point le plus bas du fond du spa pour amener l'eau la plus froide au réchauffeur et permettre la vidange du spa.
Specifications
| Material | ABS treated against pool chemicals and UV |
|---|
| Supplied with | Body, gaskets, plastic nut and screws |
|---|
| Pipe connection | 1.5" threaded |
|---|
Volume: 0.01 m³
Availability: Made to order
Frequently asked questions
How does the water/air jet mixer work?
Pressurised water from the spa pump passes through the venturi in the WAJ mixer, draws air in from the air line and delivers the aerated stream to the jet nozzle for the hydro-massage effect. One mixer is cast into the spa wall behind each jet position, solvent-welded to 1.5 inch pipe.
What does the air controller do?
The AC air controller sits on the deck at the head of the air line and lets the bather set how much air the venturis draw — from a soft stream to a strong bubbling massage — without touching the pump. The APB-1 air push button switches the spa pump on and off pneumatically, so there is no electrical switch near the water.
How are the jet nozzles adjusted?
The JN-1 directional flow ball fits inside the 1.5 inch pipe and turns to aim the aerated stream at the bather's back, shoulders or feet, so each seat can be tuned after the spa is filled. Screw the nozzles in after the tile finish is complete and set all nozzles on one pump to similar angles so the jets deliver evenly.
