Waterstar logo — swimming pool equipment manufacturer in Egypt

Песочный фильтр 30" (верхний вентиль)

Размер: 30" (750 mm)

Product Code: T750-30a

Category: Бытовые песочные фильтры

Песочный фильтр из намотанного стекловолокна с верхним подключением вентиля, 30 дюймов (Ø750 мм). Номинальная производительность 22 м³/ч, площадь фильтрации 0.44 м², поставляется с 6-позиционным многопозиционным вентилем 1.5 или 2 дюйма (фильтрация, обратная промывка, уплотнение, циркуляция, слив, закрыто). Корпус из намотанного стекловолокна не подвержен коррозии и не боится хлора и солнца, поэтому подходит для наружных технических помещений. Заполните кварцевым песком Waterstar 0,4–0,8 мм и используйте с насосом, производительность которого не превышает номинальную; выполняйте обратную промывку, когда манометр показывает на 0,5–0,7 бар больше давления чистого фильтра. Рассчитан на бассейн объёмом примерно 132–176 м³ при времени оборота 6–8 часов.

Sand Filter — Top Mount — WaterstarSand Filter — Top Mount 30" (750 mm) — WaterstarПесочный фильтр 30" (верхний вентиль) — T750-30a — WaterstarSand Filter 30 inch (Top Mount) — WaterstarSand Filter 30 inch (Top Mount) — Waterstar

Specifications

Media0.4–0.8 mm silica sand, no gravel
Valve6-way top-mount multiport
Rated flow22 m³/h
Filter area0.44 m²
ConstructionFilament-wound FRP
Filtration rate50 m³/h/m²
Vessel diameter750 mm (30")

Volume: 0.81 m³

Availability: In stock

Frequently asked questions

Which filter diameter matches my pump?

Each top-mount filter is rated at 50 m³/h per m² of bed area: Ø500 mm = 10 m³/h, Ø600 = 14, Ø750 = 19, Ø900 = 32 and Ø1005 = 43.5 m³/h. Choose the filter whose rated flow is equal to or higher than the pump's design flow — a filter that is too small for the pump lets dirt through and shortens cycles. Match the multiport valve size (1.5 or 2 inch) to your pipework.

What sand does the filter take and how much?

Graded silica sand 0.4–0.8 mm (product FM-4-8-25, 25 kg bags). The Ø1005 mm filter also takes a 1–2 mm gravel underbed. The number of bags depends on the diameter and bed depth — it is on each filter's data sheet, or ask our team with the model number.

When should I backwash?

Note the pressure gauge reading with a clean bed after each backwash. When the reading rises about 0.5–0.7 bar (7–10 psi) above that, or at least weekly in season, backwash until the sight glass runs clear, then rinse for 20–30 seconds before returning to Filter. Always stop the pump before moving the valve handle.

Top-mount or side-mount?

Top-mount filters (this range, Ø500–Ø1005 mm) carry the multiport valve on the vessel and are the compact choice for villa and residential pools. Side-mount filters (Waterstar WS series, Ø1200–Ø2000 mm) have the valve on a separate manifold and a manhole for media changes, and are built for hotel, club and public pools.

You May Also Need