Super Star Pumpen
Leistung: 0,75 kW (1 PS)
Product Code: SS-100M
Category: Pumpen
SuperStar Schwimmbadpumpe, 0.75 kW (1 PS), 220 V einphasig 50 Hz. Maximale Fördermenge 70 m³/h, maximale Förderhöhe 19 m. Selbstansaugende Kreiselpumpe mit integriertem Vorfilterkorb, der Blätter und Haare vor dem Laufrad abfängt, sodass der Filter einen sauberen Volumenstrom erhält und der Korb ohne Werkzeug geleert wird. Geeignet für Privatbecken bis zur mittleren Größenklasse und für die Spa-Umwälzung. Legen Sie die Pumpe nach der Nennfördermenge des Filters und der Rohrleitungslänge aus — eine überdimensionierte Pumpe kanalisiert das Sandbett und verkürzt die Filterzyklen — und bauen Sie saugseitig ein Rückschlagventil ein, wenn die Pumpe oberhalb des Wasserspiegels steht.
Specifications
| Speed | 2800 rpm |
|---|
| Phases | Single phase |
|---|
| Current | 4.8 – 4.4 A |
|---|
| Voltage | 220–240 V |
|---|
| Warranty | 2 years |
|---|
| Frequency | 50 Hz (60 Hz optional) |
|---|
| Rated power | 1 HP (0.75 kW) |
|---|
| Run capacitor | 450 V |
|---|
| Inlet–outlet | 2" (DNA/DNI) |
|---|
| Overall L×W×H | 600 × 375.5 × 390 mm |
|---|
| Performance curve | https://gklilzurazsaxhtyhutq.supabase.co/storage/v1/object/public/product-images/technical/superstar-performance-curve.png |
|---|
| Impeller / diffuser | SSP1007A / SSP1003A |
|---|
| Insulation / ingress | Class F / IP55 |
|---|
Volume: 0.06 m³
Availability: Made to order
Frequently asked questions
Which pump size do I need for my pool?
Start from turnover: the whole pool volume should pass through the filter in about 8 hours for a residential pool, 6 hours for a commercial pool and 4 hours for a competition pool. Divide the volume in m³ by that time to get the flow in m³/h, then pick the pump whose curve delivers that flow at your system head — and never above the filter's rated flow. Waterstar pumps run from 1 HP (0.75 kW, up to 70 m³/h and 19 m head) to 3 HP (2.2 kW, up to 95 m³/h and 25.5 m head). The pool calculator on this site does the arithmetic.
What is the difference between the SuperStar and HyperFlow pumps?
Both are self-priming centrifugal pumps with an integral strainer basket, Class F insulation, IP55 protection and a 2-year warranty. The SuperStar has 2-inch inlet and outlet ports for larger pipework and higher flows; the HyperFlow uses 1.5-inch ports in a more compact body suited to residential pools and spa circulation. Each is offered in 1, 1.5, 2 and 3 HP.
Single-phase or three-phase?
The 1, 1.5 and 2 HP models run on 220–240 V single phase, 50 Hz (60 Hz on request). The 3 HP models (SS-300T and HF-300T) are three-phase 220/380 V, which suits hotel, club and semi-commercial plant rooms where a three-phase supply is available.
Can the pump be installed above the water level?
Yes — the pumps are self-priming. Keep the suction run short, fit a check valve on the suction line so the pump stays primed after a stop, and install the pump under cover with ventilation: IP55 protects against splashing and dust, not submersion. Empty the strainer basket weekly in season.
