Bombas Super Star
Potencia: 0,75 kW (1 CV)
Product Code: SS-100M
Category: Bombas
Bomba de piscina SuperStar, 0.75 kW (1 HP), 220 V monofásica 50 Hz. Caudal máximo 70 m³/h, altura manométrica máxima 19 m. Bomba centrífuga autoaspirante con prefiltro integrado cuya cesta retiene hojas y cabellos antes de la turbina, de modo que el filtro recibe un caudal limpio y la cesta se vacía sin herramientas. Adecuada para piscinas residenciales hasta el rango de tamaño medio y para la circulación de spas. Dimensione la bomba según el caudal nominal del filtro y la longitud de la tubería — una bomba sobredimensionada canaliza el lecho de arena y acorta los ciclos de filtración — y monte una válvula antirretorno en el lado de aspiración cuando la bomba quede por encima del nivel del agua.
Specifications
| Speed | 2800 rpm |
|---|
| Phases | Single phase |
|---|
| Current | 4.8 – 4.4 A |
|---|
| Voltage | 220–240 V |
|---|
| Warranty | 2 years |
|---|
| Frequency | 50 Hz (60 Hz optional) |
|---|
| Rated power | 1 HP (0.75 kW) |
|---|
| Run capacitor | 450 V |
|---|
| Inlet–outlet | 2" (DNA/DNI) |
|---|
| Overall L×W×H | 600 × 375.5 × 390 mm |
|---|
| Performance curve | https://gklilzurazsaxhtyhutq.supabase.co/storage/v1/object/public/product-images/technical/superstar-performance-curve.png |
|---|
| Impeller / diffuser | SSP1007A / SSP1003A |
|---|
| Insulation / ingress | Class F / IP55 |
|---|
Volume: 0.06 m³
Availability: Made to order
Frequently asked questions
Which pump size do I need for my pool?
Start from turnover: the whole pool volume should pass through the filter in about 8 hours for a residential pool, 6 hours for a commercial pool and 4 hours for a competition pool. Divide the volume in m³ by that time to get the flow in m³/h, then pick the pump whose curve delivers that flow at your system head — and never above the filter's rated flow. Waterstar pumps run from 1 HP (0.75 kW, up to 70 m³/h and 19 m head) to 3 HP (2.2 kW, up to 95 m³/h and 25.5 m head). The pool calculator on this site does the arithmetic.
What is the difference between the SuperStar and HyperFlow pumps?
Both are self-priming centrifugal pumps with an integral strainer basket, Class F insulation, IP55 protection and a 2-year warranty. The SuperStar has 2-inch inlet and outlet ports for larger pipework and higher flows; the HyperFlow uses 1.5-inch ports in a more compact body suited to residential pools and spa circulation. Each is offered in 1, 1.5, 2 and 3 HP.
Single-phase or three-phase?
The 1, 1.5 and 2 HP models run on 220–240 V single phase, 50 Hz (60 Hz on request). The 3 HP models (SS-300T and HF-300T) are three-phase 220/380 V, which suits hotel, club and semi-commercial plant rooms where a three-phase supply is available.
Can the pump be installed above the water level?
Yes — the pumps are self-priming. Keep the suction run short, fit a check valve on the suction line so the pump stays primed after a stop, and install the pump under cover with ventilation: IP55 protects against splashing and dust, not submersion. Empty the strainer basket weekly in season.
